Austin loves its trees, and the city has rules to protect them. Before you remove a large tree from your yard, it is important to know whether you need a permit. Cutting a protected tree without approval can lead to fines and delays, even on your own property.
This guide explains the basics. Rules can change, so always confirm the details with the City of Austin or a local arborist before work begins.
Which Trees Are Protected in Austin?
The City of Austin protects trees based on trunk size and species.
- Protected trees: Most trees with a trunk diameter of 19 inches or more are protected. Removing one usually requires a permit.
- Heritage trees: Certain species with a trunk of 24 inches or more are heritage trees. These include oaks, pecans, cedar elms, bald cypress and Arizona walnut, among others. Heritage trees have even stricter rules.
- Smaller trees: Trees under 19 inches usually do not need a removal permit, unless other site rules apply.
How Trees Are Measured
Trunk size is measured at four and a half feet above the ground. This is called diameter at breast height. For a single trunk, you can wrap a tape around the trunk to get the circumference, then divide by about 3.14 to get the diameter. Trees with several trunks use a special formula, so an arborist can help you measure them correctly.
When You Might Need a Permit
- You want to remove a healthy large tree to build an addition, pool or driveway.
- A large tree is too close to your home and you want it gone.
- A protected tree is declining and you are not sure it can be saved.
- You are planning construction that will damage the roots of a large tree.
Dead and Dangerous Trees
Dead trees and trees that pose an immediate danger may be handled differently. Even so, the city may still want documentation, such as photos or an arborist report. If a storm drops a protected tree on your house, safety comes first. Take photos and keep records of the damage. Our crews can help you document the situation.
How the Permit Process Works
In general, the process looks like this:
- Measure the tree: Find the trunk diameter at four and a half feet.
- Check the rules: Confirm whether the tree is protected or heritage.
- Apply: Submit an application to the City of Austin with photos and details.
- Review: A city arborist reviews the request and may visit the site.
- Decision: The city approves, denies or asks for changes, such as planting new trees.
Some approvals require mitigation, which often means planting replacement trees or paying into a tree fund.
Mistakes to Avoid
- Guessing the size: Measure the trunk at the right height before you decide.
- Cutting first, asking later: Fines and replacement costs can be high.
- Forgetting the roots: Construction near a protected tree can count as damage.
- Hiring an unknown crew: A company that ignores the rules can leave you with the penalty.
Why Work With a Local Arborist
A local arborist can tell you quickly whether your tree is likely protected and what the city will look for. Sometimes tree trimming or tree cabling can solve the problem without removal. When removal is the right choice, our crew handles the tree removal safely and cleanly.
Austin Complete Tree Service has worked with Austin tree rules since 1978. Our certified and experienced arborists can help you understand your options before you make a costly mistake.
Tree Permit Questions
How do I measure my tree for a permit?
Wrap a tape around the trunk four and a half feet above the ground, then divide that number by about 3.14 to get the diameter. Trees with several trunks use a special formula.
What happens if I remove a protected tree without a permit?
The city can issue fines and may require replacement trees. It is always better to check first.
Can my tree company apply for the permit?
In many cases, a tree company or arborist can help you gather the information the city needs and guide you through the process.
Related reading: the Austin heritage tree ordinance, tree removal cost in Austin and trimming a neighbor's tree in Texas.